machine

A 1,500-ton tunnel boring machine is already traveling to Madrid to drill the new Line 11

by

“Notify when you leave and when you arrive” Mayrit has already done the first. The second will be in more or less a month when all the pieces are already on Spanish soil. Mayrit is not the youngest son of a family. Mayrit has many fathers and mothers. Many. Those necessary to give life to a 1,500 ton tunnel boring machine. That tunnel boring machine that will directly expand line 11 of the Madrid Metro. A line that, until now, has been excavated with much more traditional means and that of course will take a huge leap forward in its future projection with this gigantic and enormous artifact. What’s coming, what’s coming Connecting Cuatro Vientos, southwest of the capital, with Valedebebas, northeast of it, Line 11 wants to become in one of those star connections in Madrid. Tracing a diagonal, the intention is to convert what is currently just seven stations into one of Madrid’s great corridors. The qualitative and quantitative leap in the progress of the works will be made by Mayrit. This gigantic tunnel boring machine weighs 1,500 tons and is 98 meters long. It is expected that each day about 15 meters can be advanced on the land, key in a line that will have stations 33 meters below ground from Madrid. My colleague Javier Márquez explained a few months ago that the transfer is not easy. The machine is built by Herrenknecht AGa German company that has assembled the entire gigantic puzzle of pieces, screws and components in its country. Once assembled, the machine is cut into pieces to be sent to our country. Of course, “it won’t be quick or easy,” as my partner explained. Now we know that the powerful tunnel boring machine has already set out on its way to Spain. It comes by land and sea. And the bulk of its pieces will arrive in Santander by boat where they will board land transport to reach the capital. Another good package of these pieces will arrive at the port of Valencia, originating in Venice. Map of the new Line 11 Once the pieces arrive, they must be transported to Carabanchel. There, next to Plaza Elpítica, this monster will drill into the ground at a rate of 500 meters per month to connect with Conde de Casal, about six kilometers from the point of origin. This stage is considered one of the most problematic and complex. Until now, the connection between Parque de Comillas (which will have a new station) and Plaza Elíptica is being done by hand. However, the transfer and assembly is so delicate and complex that it will not be until March 2026 when everything is expected to be ready in the Madrid neighborhood to begin drilling the ground. The system is so complex because the tunnel boring machine is not only responsible for excavating the earth and disposing of what is found there. While working advancing into the subsoil, an auger transports the excavated material with a conveyor belt. This material can be washed if it encounters mud but it can also affect the stability of the ground with injections of bentonite, water or foam. All while sensors control the pressure the machine experiences to control how fast it can work. If everything happens according to the planned deadlines, the last piece from Mayrit should arrive in December and, as we said, it is not expected to come into operation until March 2026. For now, it’s time to pull the shovel and pneumatic hammer. Photo | Madrid Metro In Xataka | Faced with daily collapses, the Madrid Metro could increase frequencies or put in “pushers.” He has chosen the second

the refrigerator and the washing machine will be the following

by

Xiaomi has entered a new phase of his conquest plan: start bringing the devices that launched in Chinabut never reached the West. The company has just celebrated a presentation event in which it has shown a lot of devices. The absolute protagonists are the new Xiaomi 15t and Xiaomi 15t Proalso a new version of Xiaomi Watch S4of the Smart Band 10 and some headphones. It was “only” a leg of the presentation. The other has had the home as the protagonist. New aspiring robotsa new camera and the Xiaomi TV S Pro Mini Lednews of products that the brand already launched in Europe. The great novelty comes from the hand of The appliances. Because, After notifying a few months ago And look at the leg with the air conditioning, Xiaomi will finally launch a washing machine and a refrigerator in our territory. This is the Mijia Refrigerator Cross Door and the Mijia Front Load Washer Dryer Pro washing. And Spain will be the spearhead for Xiaomi. The cold and wifi cold refrigerator A few months ago, coinciding with the arrival of heat, Xiaomi launched an advance in the Spanish market: the MIJIA AIR CONDITIONER PRO ECO. In an interview, Borja Gómez Carrillo, Country Manager of Xiaomi Iberia, confirmed that this final stretch of 2025 The washing machine and the refrigerator would reach our market. They were defining what models they brought (because in China, the fan is quite wide), but we already have the details. Starting with the refrigerator, The Mijia Refrigerator Cross Door It is a four -door combi model (two for the refrigerator and two for the freezer). Among its technical characteristics linked to a “life” refrigerator, we find: Double investor with a guarantee of 10 years. 90º opening doors. Total capacity of 502 liters. External touch screen for settings. Technology to suppress bacteria. Temperature control by areas that go from -1º to 5th. Dimensions of 852 x 600 x 1.912 cm and a weight of 85 kilos The key, beyond these specifications, is that it has WiFi. Yeah, It is not something so weird today And there are already several models in the market that have connection to send us notices or make a remote diagnosis, but the strength of this product is that it is connected to Xiaomi Home. We will enter this later, but what we can expect is the logical thing of a refrigerator connected to the Internet: remote temperature adjustment, change cooling mode (superfrío, super -gelding or automatic), receive alerts if something goes wrong (for example, if the door does not close well) and we can also update it and even match it with Alexa and Google Asistant To change the temperature to the flight. Washing machine to ia On the other hand, we have the Mijia Front Load Washer Dryer Pro. It is a sink whose main characteristics are as follows: 525 millimeter door diameter. Dimensions of 59.8 x 57 x 85 cm. Centrifuged at 1,400 rpm. Capacity in its washing machine: 9 kg. Capacity in its dryer function: 6 kg. Motor with direct traction and 12 years warranty Xiaomi emphasizes that it is 25% more efficient than others in class A, has rapid 12 -minute washing programs, self -limited systems and bacteria elimination (99.99% of them). But, as in the case of the refrigerator, it is in the intelligent functions where it stands out. It is also connected to Xiaomi Home And it can be updated, but perhaps the most comfortable thing is that we can customize the programs directly from the mobile instead of from the front panel of the device. To this connection is added artificial intelligence to detect the ideal temperature for drying depending on the tissues we have involved and a system that dose the detergent and softener depending on the weight to spend less product. The ecosystem is the key. And Apple knows it well Returning to our interview with Borja, he told us that What they are looking for is to expand the so -called “ecosystem”. That is where all products that are not tablets or smartphones enter, and for this, Xiaomi has a strategy that they baptized as human x car x home that aims to a total connectivity between All the legs of that ecosystem. In China it is very developed (and more With the car for a few months), But little by little they bring those devices to make more sense to an ecosystem that felt something lame only with mobile phones, cameras, vacuum robot or toothbrush. It is also a way to reinforce all aspects of the brand, obviously. Apple users know him well. They may arrive at the brand for the iPhone, and then they acquired a Mac, Airpods or a Apple Watch. Now maybe an Android mobile seem better, but if they use the airpods or the Apple Watch, they are “tied” to that ecosystem by mere comfort. The point is that Xiaomi is betting on implanting in the West something similar to what they have in Chinaseeking that, for comfort, the user acquires devices of the same brand because it is easier to control them all with an app than to fill the house with different brands, each with their own control application. Each of those devices reinforces others and makes the ‘switching cost’, or the cost of changing, more complicated. There is the meaning (beyond the comfort of controlling the washing machine with the mobile) that traditional appliances are under the umbrella of the same platform. “Coming Soon”, although Spain will be a pioneer Now, beyond the characteristics and that reinforcement to the ecosystem, little we can say both of the refrigerator and the Xiaomi washing machine. We do know that Spain, as happened with the air conditioning, will be the advance of these releases at European level, but when we look for details about the launch, we only have a ‘Coming Soon’. The same with the price. The Chinese company must continue to value … Read more

The human brain works as a predictive machine. The question is if a Cyborg future awaits us: 1×22 crossover

by

We have a new episode of Crossover, the 1×22, and attentive because this time the topic is so interesting and has given so much that we have dedicated the entire program. Thus, this time we have been able to interview the Dr. José Sánchezneuroscientific and disseminator, which investigates How the brain worksemotions and Intelligence. In this interview of just over an hour Sánchez makes us an introduction to his experience with this area and then start with a unique idea: that the brain is a predictive machine. It also speaks to us, of course, artificial intelligence – the generative is of course A predictive machine– And with human emotions, but then the thing gets interesting. And he does it because with him we chat of the impact, present and Neuralink future and brain chips of other rivals. How will that impact our future? Will we end up being something like Cyborgs? We do not know, but before that happens, there is another debate we are talking about: that of social relationships and how these advances can affect mental health. Without a doubt, a spectacular episode that we hope you enjoy as much as we have enjoyed seeing it. Do not hesitate to comment, please, both here and in the YouTube channel itself. On YouTube | Crossover

Roborock opens with a 1,500 euro washing machine

by

Roborock is One of the best known brands in the vacuum robots segment And he has just expanded his catalog with new products. Hand vacuum cleaners, a new high-end robot, a corteped robot and the one that concerns us: its first high-end washer. It is called Roborock Zeo X and marks a trend: that of Chinese brands entering the large appliance sector. Chinese technology brands want to conquer the home Chinese brands that manufacture appliances there were already many (Haier, Hisense, Measure …), but recently we are seeing as other purely technological brands are going to this category. We have the precedent with the alliance between Midea and Huawei. In 2020 they announced a series of appliances that worked with Harmonyosalthough it did not leave China. A clear recent example we have in Xiaomi, which had already conquered mobile phones and has long expanded its ecosystem to other segments: out of home, The car. Inside, Large appliances. We saw it in its event to celebrate the fifteen anniversary that was held last May. Within their Mijia range they announced airs conditioned, refrigerators, washing machines and even an intelligent tap. For now, Only air conditioner has arrivedbut the plan is to bring the fridge and the washing machine before the end of the year. Now, Roborock follows his steps. Roborock Zeo X: Lava and Dry with a design that does not look like a washing machine Earlier this year they already made their first foray into the washing of clothes with the Roborock Zeo Lite and Zeo Minibut this is its first high-end washing machine and consolidates its entry into a segment that until recently was unknown. Roborock Zeo X has a embedded design that moves away from the classic front front. The door is tactile and the controls are found in the glass itself, but when we are not using it they are not seen, leaving a clean front that does not seem like a washing machine. A Chinese company that you do not know manufactures 35% of all microwaves in the world. Probably yours too To ensure deep and efficient washing, it has a technology called Finefoam that allows you to better penetrate tissues, while reducing water consumption by 32% and energy by 20%, always according to Roborock. As for drying, its ZEO-CYCLE function uses a natural zeolite mineral to dry at low temperatures (between 37 and 50 degrees), so that problems with delicate tissues are avoided. Of course, intelligent functions could not miss. Its algorithm automatically adjusts the amount of water, drum speed and drying temperature. It also has a detergent tank that is adjusted automatically and avoids us having to fill it every time. It will cost 1,499 euros. In Xataka | We are experts in technology, but it is time to buy a washing machine and we suffer

China’s first avant -garde lithography machine is not the biggest US problem. They will be the other two that are on their way

by

The semiconductor industry is strategic for great powers. Without exception. Its technological development is closely linked to its ability to manufacture or acquire avant -garde chips, hence the US and its allies are deploying Successive packages of sanctions They pursue stop the technical progress of China. In this situation the country of Xi Jinping only has one option: invest in its chips industry for become independent of foreign technologies. And he is doing it. Two of its largest investments They arrived in 2014 and 2019before the technological war of which we are witnessing was unleashed. In 2014, the Chinese government injected about 19,000 million dollars into its chip industry, and in 2019 this figure increased to touching 27.5 billion dollars. However, these investments pale in front of China at the end of 2023. And it is that just two years ago the government approved An investment of 41,000 million dollars expressly dedicated to manufacturers of lithography equipment. The achievements are beginning to arrive. As we explain yesterdayPulin Technology, one of the many Chinese photolithography machines, has sent one of its clients its first avant -garde team using nano -impression lithography technology (it is known as NIL by its denomination in English Nanoimprint Lithography). On paper this machine will initially produce 5 nm chips, and in the future You can reach the 2 nm. However, this is not all. China has at least two other extraordinarily ambitious and promising projects. Nil lithography is already ready. And the UVE photolithography is on its way NIL lithography is not entirely comparable to the extreme ultraviolet photolithography (UVE) implemented by the Dutch company ASML in its most advanced machines. Its operating strategy is very lowered by the cost of these equipment, but also entails the execution of several sequential processes that make it slower than UVE and UVP lithography. For this reason, the Pulin team is not the end of the road to China. And all probability during the next months will see other photolithography solutions developed by Chinese companies. In the middle of last March several Asian media collected a photograph taken at the Huawei Research Center in Dongguan, in the province of Canton, in which it appeared The prototype of a UVE lithography team Designed and manufactured entirely in China. Presumably this machine is similar to those produced by ASML, which invites us to anticipate that for 2026 the country led by Xi Jinping will have the ability to produce on a large scale advanced chips using this technology. However, China’s plans do not end here. Greater resolution in practice implies that it is possible to produce semiconductors with more transistors, and, therefore, more sophisticated and powerful And it is that the Chinese Academy of Sciences is finishing the one that is undoubtedly the most ambitious project of those who are developing the Chinese semiconductor industry. According to Dr. Kiman expert in the manufacture of integrated circuits who has worked in Samsung and who currently investigates for TSMC in the US, China is about to reach a “Deepseek” in the field of integrated circuit industry. This simply means that it is preparing to reach a disruption that has the potential to place this Asian country at the same height as the US, Taiwan or South Korea. However, China’s strategy to produce avant -garde chips is very different from what their rivals have used until now. Each of ASML UVE machines incorporates its own ultraviolet light source, but the Chinese Academy of Sciences seeks to generate this important radiation to produce advanced chips using a syncrotronwhich is nothing other than a circular particle accelerator that is used to analyze atomic level the properties of matter, such as various types of materials, or even proteins. It’s called heps (High Energy Photon Source or high -energy photons source), it is in Beijing and we can see it in the cover photography of this article. An important note before moving forward: the ultraviolet light (UV) is responsible for transferring the geometric pattern that contains the design of the chips to the Silicon wafer. This means, in broad strokes, that the UVE light has the ability to make possible the manufacture of integrated circuits with a greater resolution than the deep ultraviolet light (UVP) that use the previous generation lithography machines that China has in their hands. And a greater resolution in practice implies that it is possible to produce semiconductors with more transistors, and, therefore, more sophisticated and powerful. A priori we can think that a particle accelerator has nothing to do with the manufacture of integrated circuits, but we would be overlooking something very important: the Heps syncotron has the ability to produce high power UVE light. In fact, it is a source designed to generate a large amount of radiation. China’s plan is to place several semiconductor manufacturing plants around the particle accelerator to which the syncotron will deliver the UVE light in the same way that a power plant delivers electricity to its customers. That simple. The date on which China plans to start this megaphabric avant -garde semiconductor, but, as we can see in the photograph, is already very advanced, so we can take it for granted, will not be leaked soon. Image | Dr. Kim In Xataka | TSMC acknowledges that it has been considered taking its factories out of Taiwan. It is impossible for a good reason

The most revolutionary and rare writing machine was lost in 1940. Until someone received a message

by

Many may not know, but WRITE MACHINES Not only were they important in the past, the present would not be auctionally similar without these tools. In fact, in 1980 Apple made a decision that few understood: declare him War to the machine to write Several centuries before, in China, someone devised the most revolutionary of all these machines. The problem is that there was only one and lost. Until now. Lost keys. THE HISTORY LA had the New York Times. It all started in 2007, when Tom MullaneyProfessor of Chinese History at Stanford, prepared a presentation about the disappearance of Chinese characters and wondered how something printed could be forgotten. That doubt led him to A revelation: How had a writing system as vast as the Chinese mechanized? He did not remember ever seeing a Chinese typewriter, and when he knocked down in his office to look at old patents, a trip that would last for years began. Discovered that, although scarce, they had existed dozen different models Chinese writing machines, each with ingenious solutions to try to represent thousands of ideograms in a portable frame. One is missing. From there, Mullaney launched a kind of hunting global: He called collectors, heirs traced on ancestry.com, visited churches, museums, even stores. Over time He gathered a collection Of unique devices, some rescued by very little of oblivion, aware that each one was an unrepeatable piece of the history of mechanized writing. However, there was a machine that could not find, not even dreaming of recovering: the legendary mingkwai. Lin Yutang’s mingkwai writing machine, as illustrated in its patent application The impossible machine. The Mingkwai It was created in the 40s by Lin Yutanga Chinese intellectual based in New York who feared that China, if it did not modernize their way of writing, It would be behind in front of foreign powers. To solve the dilemma of how to represent thousands of characters with a few keys, Lin devised a Revolutionary mechanical system: Any combination of two keys activated gears that showed up to eight possible characters in a central window that baptized as the “magical eye”, allowing the user to choose the right one. With only 72 keys, Lin had built an interface that allowed to generate tens of thousands of charactersa kind of chimeric keyboard capable of typing an entire universe. He baptized his creation as Mingkwai, which can be translated (freely) as “clear and fast.” Lost. The problem is that your demonstration before Remington executives It was a disaster: The machine failed and Lin ended up ruined. Along the way, the only prototype was sold to Mergenthaler Linotype, a Brooklyn printing press. From there, the trail It was lost. In his book The Chinese Typewriter (2017), Mullaney wrote that it was most likely to have ended in a landfill. Until, by chance, something extraordinary happened. Lin Yutang The reunion. We arrive at January 2025when Jennifer and Nelson Felix, from Massopequa (New York), reviewed boxes stored after her death. Suddenly, they found A wooden box containing something strange: a typewriter with Chinese keys. Nelson, fond of sale on Facebook, He published some photos In a specialized group without imagining that I was going to detonate a storm of messages. In less than an hour, hundreds of comments, many in Chinese, shouted at one thing: “Contact Tom!” While giving a talk in Chicago, Mullaney He began to receive a waterfall of notifications. As soon as he saw the photos, the man knew that he had to do with the mingkwai. Fear of losing it. The Times told that the historian did not feel jubilation with the news, but rather fear. If someone bought it on eBay and turned it into a lamp or a coffee table, it would disappear forever. What did he do? He wrote to the couple urgently, he told them the history of the machine and asked them to consider sell it to a museum. Jennifer, incredulous, understood in a short time that the object of more than 50 kilos was not just junk. “It was lost half a century,” he explained to Times. “We didn’t want it to be lost again.” From the basement to the campus. The story charged an unexpected turn when Mullaney discovered that Jennifer’s grandfather, Douglas Arthur Jung, had worked on Mergenthaler Linotype And he probably saved the scratch machine when he took it with him. For decades, the family had preserved it without knowing what it was. In April, the couple accepted Sell to Stanfordwhich acquired it thanks to a private donor. When he finally arrived in California, Mullaney witnessed his unpacking with expectation. There, in the University warehouse, he discovered that his mechanism was even more delicate and sophisticated of what I imagined. The machine not only survived: He spokeor something similar. He began to wonder what engineers could discover if they were carefully dismantled. Could, perhaps, replicate it? Does Lin’s thoughts unravel in 1947, when he believed that a typography could save his nation? A recovered story. The History of the mingkwai It is more than that of the rescue of an exotic and rare machine. If you want, it is even a metaphor of ideas that, without interlocutors, run the risk of disappear forever. Mullaney understood that it was possibly the last one who could understand what these machines represented: the linguistic dilemmas of a civilization, the technological aspirations of a nation then marginalized, or even the desperate elegance of a visionary inventor. The mingkwai was a device that No one wanted In his time, too advanced already too clumsy, the result of an idea too big for an era that still did not know how to translate it. But when finding it, complete and still capable of astonishing, the professor not only recovered a museum piece: he rescued from oblivion an entire chapter in the history of human writing. Image | StanfordCampbell, Brobough & Free, American Memory Digital Item Display In Xataka | In 1980, Apple made … Read more

Ukraine has borrowed the most basic idea of ​​Lego. And has transformed it into the final machine for war

by

Drones with shotguns of double cannonrobots Lanzaluelaunmanned vessels With missilesairplanes With shotgunsdevices with kilometer cables of optical fiber Looking for its goal through algorithms … The war in Ukraine became the largest war laboratory of modern contests, but in recent months that transformation has become more palpable than ever. Because soldiers are no longer recruited, they are recruited directly robots. Modular fights. They counted this week In Insider that among the key actors of this unprecedented experimentation of military terrestrial robotics is the company Estonia Milrem Roboticswhose land autonomous vehicle Themis It has been deployed by the Ukrainian forces on the front. The striking, however, is not only the presence of these systems, but the way in which Ukrainian soldiers are using them: unforeseen and highly creative. Kuldar Väärsi, founder of the company, He has highlighted that troops have managed to expand their abilities by adding modifications, adaptations and even using them to Not expected taskssuch as collection of corpses, controlled explosions, supply transport or mines. In a context where each resource can mean life or death, tactical innovation is born directly from the front. Military Lego. The Thanmis model can load up to 1,200 kgmove at 20 km/Hy wearing weapons like machine guns or launcherin addition to acting in evacuation, transport or deactivation tasks. However, its real value lies in its modularity: it is an adaptable system, almost like a set of War Legoaccording to Oleksandr Yabncanka, head of robotized systems of the Da Vini Wolves battalion. Without having specialized models for each mission, the Ukrainian units use a single type of robot as a common basis They modify according to your operational needs. This flexibility reflects a generalized philosophy in the Ukrainian army since the beginning of the conflict: improvise, adapt, survive. Fifth Generation Themis Military reinvention. Since the first year of war, Ukraine has been synonymous with reuse and Technical creativity. He has re -adapted Western lanzamisiles to Soviet platforms, mounted machine guns old in trucks, modified drones Commercial for suicidal missions and created mills such as unmanned ships and turrets with artificial intelligence. Milrem is not the only company at stake: local companies such as Roboneers either FRDMtogether with European signatures such as ARX ​​Robotics (Germany) or Isolit-Bavo (Czech), are actively collaborating in the design and deployment of new models of land robots. This confluence between foreign industry, local operators and tactical demands generates an eInnovation sew that had not been seen before on this scale. The war of the future. Be that as it may, there is a name that has risen above the other models. Bloomberg explained it With a scene: on the wooded banks of the Dnieper River, on the outskirts of kyiv, two small robotic vehicles descend towards the sand as if they were mechanized crabs. One transports food, the other sowing anti -tank mines. It is about Termit modelTangible symbol of how Ukraine, after three and a half years of total war against Russia, has become the forge of a new war paradigm: a war based on modular technology, cheap and fast to produce. In a context of scarcity, urgency and systematic improvisation, the country has managed to create an arms ecosystem that rivals (for its agility and efficiency) with the great industrial powers. Already the 40% of the armament which uses comes from National Sourcesand according to Zelenski, this autonomy can serve as model for allies of NATO that face an increasingly volatile and dangerous geopolitical future. Military production, as he says Oleksandr Kamyshin experthas become the oil of Ukraine, the resource on which its survival is constructed. Ukrainian Termit Models Robot and converted engineers. The case dE Maksym Vasylchenko embodies the metamorphosis of the country. In 2022 he worked by installing food machinery for international companies; today directs Tencorea startup that has developed The Termitthose modular robots that already use more than twenty military units in the front. With satellite connectivity Via Starlink and load transport capacity, evacuation of wounded or deployment of mines, these vehicles They have replaced to soldiers in areas of maximum risk, not only because they are more expendable, but for its lower cost: a basic termit It costs $ 20,000while the death of a soldier supposes the State a nearby total compensation at 380,000. A different company. Of five initial employees to early 2024Tencore has grown to 175 workers, six venues, and projections of 80 million dollars In annual income. All driven by direct collaboration with combatants: a chat with forty active users serves as a constant feedback channel, where every five or ten minutes suggestions are provided. This agility, impossible in the processes of acquiring Western governments, is one of the keys to the success of the Ukrainian model. An army of termit ready for operations An area of ​​death. We have coming counting: The war in Ukraine has established a new operational environment dominated by low cost drones. Approximately the 70% of the Russian team destroyed has fallen by unmanned vehicles, many of them converted commercial adaptations. These FPV units already operate in almost any climatic condition, deliver blood in trenches or attack tanks with surgical precision. The battlefield has become constant, immediate and three -dimensional, expanding the call Kill Zone At any time and place. At the beginning of June, Ukraine demonstrated its offensive capacity coordinated to the destroy bombers strategic in Russian bases that went from the north of the country to Siberia. The traditional logic of the front has been replaced by a decentralized war where the direct human risk is reduced to the minimum possible thanks to autonomous, fast and sacrifiable platforms. The Russian answer. Of course, Moscow has not lagged behind. As We have spoken For weeks, ha adapted the drones Iranian Shahed to your needs and has begun to display vehicles Fiber cable guided optics, which makes them immune to electronic interference. In May, the Russian production of combat drones increased 17% In a single month. The Russian strategy is clear: standardization, volume and industrial … Read more

This is how the creator of the most complex machine on the planet supports the US pressure

by

In 2022 sales of ASML In China they amounted to 2.9 billion euros, which represented 13.8% of its annual sales. At that time Taiwan was a more important market for this company than China. In fact, in 2023 the clients of the island bought this manufacturer lithography equipment For a total value of 8,100 million euros, while its Chinese clients disbursed 7.3 billion euros. And, curiously, in 2024 China consolidated as the largest market for ASML with total sales of 10.2 billion euros. This company of the Netherlands cannot sell its most advanced equipment to its Chinese clients, such as the machines of extreme ultraviolet lithography (UVE) or deep ultraviolet (UVP), but at the moment you can give them the solutions that allow producing chips with mature integration technologies. These are the semiconductors that are mostly used in cars, appliances or electronic devices, among other products, and usually occur in nodes of 28 nm or less advanced. ASML needs China. And China still needs Asml Christophe Fouquet, the general director of ASML, has a huge challenge ahead. Like his predecessor at the head of this Dutch company, Peter Wennink, he has the obligation to defend the interests of his company. And currently the tension held by the US and China does not make it easy. The sanctions that They have deployed US and the Netherlands They prevent Asml selling Your most advanced lithography teams To its Chinese clients. And neither can some maintenance and after -sales services services provide. In the Netherlands 2024 will be remembered as the year in which the strap between ASML and the Dutch government reached its maximum expression. Christophe Fouquet He is convinced about what US will continue to put pressure on its partners to even more harden the sanctions that seek to stop the development of the Chinese industry of the integrated circuits. In fact, according to the British weekly The Economistthis executive argues that European politicians and regulators should do more to help their company. In 2024 China was consolidated as the largest Asml market with total sales of 10.2 billion euros Anyway, one of the figures in which we have repaired a few lines above gives us a very accurate clue about how ASML is dealing with prohibitions from the US and endorsed by the Netherlands government that could greatly degrade their business. As we have seen, in 2024 China was consolidated as its largest market with total sales of 10,200 million euros. This success is because Chinese manufacturers of integrated circuits have bought A ASML many suitable photolithography equipment to produce mature semiconductors. This Dutch company has much more advanced chips manufacturing machines, such as the UVE and UVP lithography equipment that I have mentioned a few lines above. And also The very complex High Opening Machine which has been designed to optimize the production of integrated circuits Below the 2 nm. As we have seen, ASML cannot deliver these teams to its Chinese clients, but, and this is a very important fact, has the effective monopoly of Uve and Uve Machines of Haute Opening. No other company has the necessary resources to produce such complex equipment. Currently TSMC, Intel, Samsung, Globalfoundries, Micron Technology and Sk Hynix are well building new chips manufacturing plants, they are well expanding some of those they have in operation. In any case, they all have something in common: they are buying the UVE and UVP equipment of ASML. And, in addition, TSMC, Intel and Samsung presumably will acquire for the next three years a large number of UVE Machines of Haute Opening. It is evident that even in the complicated current situation it is difficult to lie to ASML. For now Your business in China enduresand will continue to do it at least until the moment when Chinese lithography manufacturers have their own UVE machines. And outside China Asml has no competition if we stick to its Porpholio of UVE machines. This is your true strength. Image | ASML More information | The New York Times In Xataka | Japan wants to recover leadership as a manufacturer of lithography equipment. And he has a plan to end the Asml monopoly

These are the chips that are capable of manufacturing without resorting to the most advanced Machine of ASML

by

TSMC is not the largest semiconductor manufacturer on the planet by chance. Morris Chang He founded this veteran Taiwanese company in 1987, but his leadership took several years to consolidate. At that time the most important integrated circuit manufacturer was Intel, but The TSMC domain In this industry during the last two decades it is irrefatable. Today monopolizes approximately 60% of the market of the manufacture of integrated circuits, and nothing indicates that in the short term Intel or Samsung, its two main competitors, will be able to dispute your leadership. The success of this company has mainly based on its ability to manufacture large -scale chips using the most advanced integration technologies available and with a very high wafer performance. Here lies its very high competitiveness. And, in addition, he has managed to preserve this position for many years, which has helped him transmit confidence to his solid clients such as a rock. His economic performance is nothing other than a consequence of his career: in 2024 he entered 34% more than in 2023. TSMC claims to be able to bring asml UVE lithography equipment to the limit This integrated circuit manufacturer has confirmed that the tests of its 2 Nm node are being successful, so you can start the large -scale manufacture of semiconductors using this photolithography during the second semester of 2025. However, its medium -term plans do not end here. And is that at the end of last April advance During his North American Technological Conference that is also testing his next avant -garde integration technology. It will call it A14 (1.4 Nm), will enter large -scale production in 2028 and we already know some of its most interesting characteristics. Kevin Zhang ensures that TSMC does not need the ASML UVE High-Nna lithography team to make 1.4 Nm One of its most important spots will consist that you will use transistors Nanosheet Gaa (Gate-alall-around) Second generation. The first generation will arrive next to the Lithography N2 (2 Nm) this year. In addition, this integration technology will land with the promise to make possible the manufacture of integrated circuits with higher performance, higher energy efficiency and a more flexible design. The usual. However, TSMC, fortunately, has been wet and in its event some figures made public that allow us to assess to what extent the arrival of the A14 node will be important. And, according to this company, the integrated circuits produced with the A14 lithography will be 15% faster than the chips manufactured in the NEN N2 with the same consumption; They will reduce energy expenditure by 30% at the same speed, and, in addition, they will put on the table the possibility of increasing the density of logic by 20%. According to Kevin ZhangSenior Vice President and Deputy Director of Operations of TSMC, the A14 node will be attractive to make chips for consumption devices and for strictly professional applications, such as, for example, GPU for artificial intelligence (AI). There is no doubt that TSMC’s promises about their lithography A14 sound good, but there is more that we should not overlook. Zhang says that they will not use the equipment of extreme ultraviolet photolithography (UVE) and haute opening (High-na) that manufactures the Dutch company ASML in this node. This is a technical capacity exhibition. These machines, the most advanced that currently exist, are suitable for producing integrated circuits of 2 nm and beyond. In fact, The lithography 14a (1.4 Nm) It will be the first in which Intel will use the Uve High opening equipment of ASML. However, as we have just seen, TSMC says it can produce chips capable of dealing with comparable semiconductors of Intel and Samsung using conventional UVE equipment. 2025 will be the year in which the lithographs of 2 nm will start, and, therefore, it will be the prelude to a presumably even more bloody battle: that of the 1.4 Nm. Image | ASML More information | Tom’s hardware In Xataka | ASML’s new lithography team divides chips manufacturers. TSMC considers not using it until 2030

We already know what the chips that will arrive until 2039 will be. The machine that will manufacture them is close

by

If everything goes as planned Intel will have its lithography 14a (1.4 Nm) List in 2026. It will be the first integration technology of this company that will use the equipment of extreme ultraviolet photolithography (UVE) and AL ASML opening. TSMC and Samsung have already confirmed that They will also bet on this machinebut for now it is Intel who carries the lead. In fact, it has been about a year and a half Testing it in its Hillsboro plant (USA). The engineers of the Dutch Company ASML have invested a decade in the development of the technology necessary to put this machine ready, which, in reality, is a high -generation extreme ultraviolet lithography team. This company of the Netherlands plans to deliver to its customers annually from 2025 about 20 teams of this type with one purpose: put in their hands the possibility of producing 2 nm chips And beyond. Much further. After the High-no lithography equipment, the Hyper-NA machines will arrive To develop the UVE Lithography team (EUV high-na for its acronym in English) ASML engineers have put a very advanced optical architecture that has an opening of 0.55 compared to the 0.33 value that the first generation UVE lithography equipment has. This refinement of the optics allows to transfer to the wafer patterns of greater resolution, hence it is possible to manufacture chips using more advanced integration technologies than those currently used in the nodes of 2 and 3 Nm. In the article we dedicate to Rayleight criteria We explain in a lot of detail what the ‘Na’ parameter consists (Numerical Aperture), But in this text it is enough for us to know that this variable identifies The opening value of the optics Used by the lithographic equipment. In this context this parameter essentially reflects the same as the opening value when we talk about The optics of a photo cameraso it conditions the amount of light that the optical elements They are able to collect. As we can intuit, the more light gathens, the better. A single UVE Machine of haute opening is capable of producing more than 200 wafers per hour However, this is not all. ASML has also improved the mechanical systems that are responsible for the manipulation of wafers with the purpose of making it possible for a single UVE Machine to be able to produce more than 200 wafers per hour. This benefit is very important for semiconductor manufacturers because it deeply conditions its competitiveness. If we want to investigate to show what is beyond the Uve haute opening teams, the ideal is that we turn to Imec, an integrated circuit research center founded in 1984 and lodged in Leuven (Belgium). It is the most experienced laboratory in the tuning of new integration technologies that we have in Europe. In fact, their engineers work side by side with ASML technicians. The slide we publish on top of these lines contains a lot of interesting information. According to IMEC in 2035 integrated circuit manufacturers will begin large -scale production of 3 angstroms chips (0.3 Nm). This milestone is very important because presumably these will be the first semiconductors made of UVE lithography equipment Hyper-na In which Asml is already working. However, of course, these machines will not arrive that year; They will be ready much earlier. That will be the time when Chips manufacturers will start large -scale production, but possibly this machine will be prepared at the end of this decade. Whatever the interesting thing is that the opening of the optics of these avant -garde lithography equipment will be, again according to IMEC, of ​​0.75 in the face of the opening of 0.55 of the UVE machines of high opening, or 0.33 in the conventional UVE equipment, as we have seen a few lines above. In any case, the itinerary of this laboratory anticipates that In 2037 the integrated circuits of 2 angstroms will arriveand in 2039 chips manufacturers will pass this barrier and go beyond the 2 angstroms. It seems science fiction, but it is not. It’s just science. Image | IMEC More information | IMEC In Xataka | China needs to develop a new type of immune chips to US sanctions. And their scientists have just achieved it

Log In

Forgot password?

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy

Add to Collection

No Collections

Here you'll find all collections you've created before.