A new generation of robots promises precision and efficiency. It also opens the door to cyberspage risks

The movement of the robotic arm seems impeccable: each turn, each clamp, each displacement occurs with the accuracy of a metronome. However, while these actions convey confidence in a hospital or a factory, another story is drawn in the background. The commands, although encrypted, let rhythms and pauses In the traffic that travels through the network. These patterns, invisible to the naked eye, in many cases allow to deduce the task executed. The same accuracy that we applaud in the robot can become a trace for external observers. Over the last years the interest in collaborative robots has shot himself. Hospitals are used as surgical assistants for their ability to make fine movements without fatigue, and in factories they have become allies for repetitive or risk tasks. Not only do productivity improve, they also reduce accidents by replacing the operator in hostile environments. The connectivity that drives its expansion, however, is also the one that can expose them to new vulnerability scenarios, According to a study in the University of Waterlooin Canada. Precision that dazzles in hospitals, a trail that can be interpreted The investigation did not focus on real -time robots by means Preprogrammed scripts. These systems receive an orders sequence and execute them with minimal human intervention, which reduces direct supervision and expands automation possibilities. At the same time, the way in which these systems structure high -level commands generates regular traffic patterns, and that regularity opens opportunities for analysis. The work was designed with a very concrete scenario: a passive attacker, someone who only observes the network traffic between the robot and its controller without deciphering it. The experiment was carried out with an arm Kinova Gen3a light robot usually used in research environments. The controller executed preprogrammed commands and the communications were protected with TLS encryption. With this assembly, the researchers registered 200 network traces corresponding to four different actions, looking for a varied and representative set. The authors began by converting network catches into temporary signals: instead of looking at the content of the packages, they analyzed when each one was sent and with what separation. Those time series were treated as acoustic signs, which allowed to apply classic signal processing techniques, such as correlation and convolution, which seek similarities and patterns in pulses and rhythms. From this transformation they trained a classifier that, in the closed environment of the test, assigned an action to each trace. The experiment used 200 traces on four actions and showed that, even with activated TLS, temporary subpatrones were detectable. Kinova Gen3 The trials showed that the method worked with remarkable efficiency: in most tests the system was able to identify the robot action with a success level close to 97%. This means that, although the orders travel encrypted by TLS, the observation of the intervals and the cadence can allow to rebuild what task it is executed. In a hospital, that could give clues about the nature of an intervention; In a factory, on the production sequence. A complete deduction is not always achieved, but the finding shows that the encryption alone is not enough. Although orders travel encrypted by TLS, the observation of the intervals and cadence can allow to rebuild what task it is executed. The finding acquires relevance to extrapolating it to real environments. In health, an attacker could identify details of a surgical intervention without the need to access the medical history, only observing the robot communication flows. In the industry, the patterns themselves could reveal assembly steps or Characteristics of a patented process. It is not an isolated failure of a specific model, but an alert signal on how connectivity multiplies the exposure. Each connected robot becomes a possible observation point. The researchers did not limit themselves to pointing out the problem: they also explored possible defenses. One of them is to modify the timing of the robot programming interface, so that the commands do not follow such a regular and predictable pattern. Another is to apply package filling and timing manipulation to hide the real rhythms. These measures could reduce the inference capacity of an attacker, although with a cost: lower network efficiency and, in some cases, more latency in the execution of the robot. Technological innovation always advances in parallel to the need to protect it. Cobots exemplify that balance: they promise efficiency and new forms of work, but also force rethink defense measures. It is not about stopping its adoption, but about doing it with a conscious look of the risks. Security and development are not opposite paths; They must travel together if you want the future of robotics to be sustainable and reliable. Images | Kinova Robotics (1, 2) | Freepik In Xataka | Alibaba is becoming the Ai Open Source sponator. Your family of Qwen models is putting the market above

How some salt has managed to overcome the efficiency of solar panels

In the kitchen, a pinch of salt is enough to give life to a dish. In the laboratory, another very different salt promises a similar effect, to give a new flavor to solar energy. What for the scientists of the University College in London is a simple chemical additive, it could become the seasoning that revolutionizes the energy future. Seasoning the panels. A team from University College London (UCL) has proven To add Guanidininum Tiocyanate to Perovskitas allows you to manufacture more efficient and stable solar cells. In trials with tin and lead perovskitas in the lower layer of tandem cells – they achieved a 22.3% efficiency, near the record for that family. Scientists have underlined a double effect: more performance and more useful life by reducing microscopic defects during crystals. Just a pinch of salt. The secret is how crystals form. Normally, during manufacturing, Perovskita crystals are formed in a disorderly way, with microscopic imperfections that reduce their efficiency and shorten their useful life. In this way, the guanidinium tiocyanate enters that acts as a modulator: it slows down and controls that process, achieving smoother and more uniform layers. It is as if adding salt, the crystals had time to grow more orderly, without leaving holes or defects that then act as electrons traps. A complementary study at ACS Energy Letters deepened in this mechanism. According to the authors, Guanidinio cations not only improve the quality of the glass, but also facilitate the extraction of electric charge, reduce ion migration and increase stability. This is especially important in the inverted structures (PIN), which are considered more stable in the long term than conventional ones. In the words of the first author of the studyYueyao Dong (UCL): “By modulating the formation of crystals in a controlled way, we were able to create much higher quality films, a change that translates directly into more efficient and durable devices.” The next solar border. The implications go far beyond a laboratory record. The issue is that each layer of Perovskita’s tandem can be designed to absorb different parts of the solar spectrum, which allows to take advantage of more light and turn it into electricity. So, According to UCLusing this type of “salt” in the lower tandem layer could further push records, since other Pervskita tandem They have exceeded more than 40% laboratory efficiency. Can you climb? Perovskitas have another advantage: they are manufactured with low temperature processes, simpler and less energy intensive than silicon. That opens the door to light and flexible modules, integrable in facades, windows or Curved surfaces. However, the interesting thing about this finding is that the additive acts during the manufacture, without the need to redesign the device. In theory, this facilitates moving it from laboratory cells to industrial modules. A door that still has to cross. However, the biggest challenge is still pending: Long -term certified durability. Perovskitas still have to demonstrate that they resist years of sun, humidity and heat without degrading. To this is added the question of lead, present in many formulations. Precisely UCL’s work bet by the tin-pull mixture, with focus on stability and reduction of defects. They are steps in the right direction, but not the final goal. ACS ENERGY LOTTERS STUDY Add a curious nuance: Small dose of Guanidinio help; Too much can be counterproductive and stop cargo transport. In other words: this seasoning works as in the kitchen, where an excess of salt ruins the recipe. A simple touch makes the difference. Like a pinch of salt, it enhances the taste of a dish, a pinch of guanidinio tiocyanate can turn Perovskita into the main ingredient of the energy transition. What until recently was a promising but fragile material, it begins to consolidate as a real alternative to silicon. If science manages to stabilize and climb it, we could be facing the beginning of a new solar era: cleaner, more powerful and more accessible. Image | Unspash and Unspash Xataka | All solar panel technologies that exist and which are more efficient, in a graph that goes 1975 until today

Vigo Airport has released a digital tower “at the forefront of efficiency.” Has lasted four days

Announced as “the avant -garde of efficiency and safety in the air sector”, Vigo airport has begun working with “the first digital tower of Spain.” Four days later, the work has stopped for a first problem. And, in the background, the doubts about its real effectiveness, the position of workers and the shadow of some layoffs. Vigo, now with Digital Tower. It was announced by Oscar Puente, Minister of Transportation, with the words we collected above. In a tweeton June 17, the politician pointed out that Vigo received a strong change in his way of working. The project started with a Vigo-Madrid flight and was qualified by bridge as “a technological milestone” that places the facilities of Vigo “at the forefront.” Four days later, the entire system has had to stop by a Error caused at 31 minutes to go into operation. What is a digital tower? A Digital Tower For air control, it comes to replace traditional control towers. In the latter, controllers work at great height to control by computer systems and their own view air traffic. In this way, it is always about choosing the best option to manage the entry and exit of flights into the maximum safety conditions. A digital tower uses all these computer systems but changes the “windows” of the screens control tower in which what the cameras see are recorded. In addition, it has a multitude of sensors and microphones to simulate with maximum precision the same sensations as an air controller has in a traditional tower. Is it better? According to the words of the Minister of Transportation, yes. AND According to Aenaalso. They ensure that the videoWall that forms 13 55 -inch monitors represent a 360º image of what is seen in the tower. This allows them to have visibility of areas that are covered in the traditional tower. The installation, as we say, has fixed cameras and two mobiles. As well as “speakers that reproduce the ambient sound of the microphones installed in the flight field.” In addition, AENA points out that “they provide a series of operational and security advantages” although it does not give examples of them. And emphasize, because it is important, “maintaining the same number of controllers.” War foot. That last part of the message is important. In social networks, numerous accounts that expose the feeling of aerial controllers have been radically opposed to the implementation of these “digital towers.” The well -known account @Controlerators in x He qualifies the digital tower of “basement with cameras designed to control several airports”. And that is the great reset that has raised among the workers. In the environment, the feeling that operations of the Airport of A Coruña can be replaced with the air management of the Viguesa Digital Tower. Alvedro (A Coruña) and Peinador (Vigo) share a company managing air control services (Saerco) so A reduction in the number of workers is feared For a remote control of both airports. In The voice of Galicia They even point out that AENA neither confirms or denies that A Coruña workers can be replaced by the new digital control tower. BNG and the Popular Party They are already working to paralyze the project. “Quite obvious defects”. In addition to the works that may be in the air, the Union of Air Controllers (USCA) ensures that Aena has rejected its request for include “high definition cameras” And they emphasize that the system does not improve the traditional because “They are not clearly appreciated Small aircraft. “They are, in the words of the” quite evident defects “union. They emphasize in words to Vigo lighthouse that the system presents operability restrictions in specific weather situations and that “would entail the imposition of time restrictions that would prevent the simultaneity of visual flights (VFR) and instrumental (IFR).” That is, for the union, a problem for “urgent health transport, customs surveillance, fire extinguishing services or maritime rescue, as well as schools or private flights.” Many doubts. Although Aena points out that “currently, more than 30 European airports have implanted that technology and is operating from a digital control tower. Outside Europe, initiatives are being developed in Australia, Canada and the United States airports,” the truth is that the operation of these digital towers raises doubts. In fact, tests in Spain are being carried out for years. In 2023 problems were already reported In the Vigo airport digital tower related to the imprecise detection of small aircraft. The project was approved in 2019, it was awarded in 2020 and until this year it has not been launched with the first flights. Something similar has happened in Menorca, where it is also being tested with a digital tower that At the end of 2022 he also reported problems security This air control system It should be underway in 2021 But for now he has not exceeded the evidence and has ended up being Vigo the city that has been awarded the first “digital control” of a flight in Spain. Joy, yes, has lasted four days. Photo | Enrique Dans and Aena In Xataka | We have been waiting for years at airports for years. Tiktok’s “airport theory” believes that it has been a mistake

Mistral AI is the French startup that opted for efficiency before Deepseek. His future is uncertain

Mistral ai is the French technological jewel. The AI ​​startup has become practically the only European representative that competes with large companies and technological startups in the US or China. He also does it with an absolute focus on efficiency, which is just what is now valued as Deepseek. However, its future is complex. A promising European startup. When we talk about her for the first time in 2023, he surprised that without having any product He managed to raise 105 million euros investment Soon, yes, the fruits of such commitment would begin to appear, which also generated that the firm raised More financing rounds. Flag efficiency. One of the defining characteristics of Mistral AI was that his work was always oriented to do more with less. To seek efficiency. The startup, knowing not being able to compete with the Bigt Tech in resources, has always sought to create more compact models but with great performance. He succeeded with Large 2 123b, which was three times smaller that calls 3.1 405b but matched that model and others like Claude 3.5 or GPT-4o in some metrics. They return to the load with Small 3 24b. The startup He has just announced The availability of Small 3 24b, its new “small” model. Actually it is not so much: those with size between 1b and 14. However, it is certainly an interesting llm for one thing: it competes from you to you with flame 3.3 70b – the last of the finish line, almost three sometimes bigger – and also does it with a latency (time it takes to appear every token) much smaller. The performance is fantastic. Latency, if we pay attention to the internal tests of Mistral, fantastic. Answer three times faster than the goal model. Its performance is comparable to GPT-4o Mini, and also exceeds QWEN-2.5 32B latency, which is something better in some benchmarks. This model, yes, has just had successor with QWen2.5-Max. Open Source, and European data. Another advantages of Mistral’s AI is that it is an Open Source AI –“Open Weights”, rather-, as he calls, Deepseek or Qwen. Unlike them, Mistral is a startup that raises data governance in the EU, something that can be inert for government agencies and European companies. It has already been seen how there is suspicion about where the data ends From our chats with Deepseek –Italy is investigating In this regard – and this is an undoubtedly striking option. Interesting uses. Mistral developers explain that their model is perfect for conversational assistants, because in them precisely matters that they respond quickly. They also highlight the ability to customize/polish the model to specialize in certain tasks such as legal council, medical diagnosis or technical support. The model is available on platforms such as Hugging Facebut it can also be executed at home in quantized seeing if you have at least 4090 or for example a MacBook with 32 GB of memory. At the moment it does not seem available In le chatthe web service that has confessed to us to be based on Mistral Large 2.1. Reasoning model in sight. But while their competitors are launched to the race for the reasoning models, Mistral has left something behind in this area. In a message in x They clarify that Small 3 does not use synthetic data “which makes it a great base for anything in reason.” In their official announcement they go further and point out that “among many other things, in the coming weeks, large and small Mistral models are expected with greater reasoning capacity.” Deepseek advancing on the right. The Chinese fashion startup has become the star of the moment with its models, and especially with its reasoning model, Deepseek R1. He has also achieved it using the same weapon as Mistral: efficiency. Deepseek’s success validates Mistral’s strategy, of course, but the question is whether Mistral will continue to compete or be overwhelmed by Chinese and US startups if they also partially or totally adopt that same approach. Mistral’s market share is modest, but is in danger of reducing with the strong competition of US and China companies. Source: FT. Doubts about the future. In media as Financial Times The concern about the future of Mistral and the European startups is discussed. There is no other to work in LLM –The German Aleph Alpha He left that race In September 2024-, and that compromises the future of European efforts to compete and not depend completely on the models of China and the US no matter how they can be. In Spain projects such as Alia are an interesting first step, but for now they are far from the LLMs and models mentioned. Operational limbo. This economic newspaper also indicates that with an assessment of 6,000 million euros Mistral is in a kind of limbo. He has raised too much money to gradually disappear, but not enough to compete with US mega -companies, for example. Acquihire on the horizon? Sean Maher, from the Entext consultancy, believes that Mistral can Follow the steps of inflection aiwhich was acquired by Microsoft – Mustafa Suleyman, current head of Ia in Redmond, was his co -founder. Thus, a potential acquisition of its resources and especially of their talent (which is usually called ‘acquihire’) is not ruled out. Image | Mistral ai

Log In

Forgot password?

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy

Add to Collection

No Collections

Here you'll find all collections you've created before.