Spain may have emerged as one of the EU states that more and better have understood and adopted the energy transition towards renewables, but there is an unquestionable geographical reality: The Iberian Peninsula is an energy island which has a problem called France.
A bottleneck that prevents Spain from exporting its enormous surplus of solar energy, so the European Commission wants to correct it with ambitious connection goals for 2030. How? Looking at the sea that surrounds the peninsula in search of partners “to lend a helping hand” to solve this limitation: across the Mediterranean with two gigantic connections to Italy and also towards the Atlantic, with a cable between Spain and Ireland.
The future cable between Spain and Ireland. The planned route would link the northern coast of Spain, specifically Asturias, with the southern coast of Ireland, with an estimated length of between 1,000 and 1,100 kilometers, as collects The Energy Newspaper. Although there is no defined route yet, the infrastructure will have to navigate considerable depths in the Bay of Biscay and the Celtic Sea.
Go ahead that the agreement signed between Spain and Ireland It is a Memorandum of Understanding to study the feasibility of an underwater electricity cable within the framework of the WindEurope 2026 congress held in Madrid signed by the Spanish vice president Sara Aagesen and the Irish minister Darragh O’Brien.
Why is it important. Because both Spain and Ireland share a structural problem: they are one of the least interconnected electricity markets in Europe and are classified as “energy islands” by the EU, which limits their ability to export renewable surpluses and reinforce their security of supply (friendly reminder: the blackout). From the point of view of energy security, more interconnection means less dependence on imported fossil fuels and more resilience in the face of shortages. This cable would diversify Spanish export routes, a detailed priority objective in REE Electrical Planning.
The energy logic of the project rests on the complementarity of renewable resources: Spain would export solar surpluses and Ireland would provide electricity generated in its offshore wind farms. Both technologies have generation profiles decoupled in time, so the exchange is technically valuable to stabilize both electrical networks: when the sun shines in Spain, it can power Dublin, when Atlantic storms sweep the north, its wind turbines can sustain Spanish industry.
Context. Spain currently has barely 3,000 MW of interconnection capacity, which represents a ratio of 2%, according to REE dataon its installed mix of approximately 150 GW. That is to say, it fails to meet the minimum target of 10% set by the EU for 2020 and has to work a miracle to reach the 15% planned for 2030. This chronic deficit limits the capacity of the Spanish system to export the growing surpluses of wind and solar energy.
The project arises at a time of maximum urgency for energy independence after the gas crisis. Recent war conflicts have led the EU to accelerate the processing of large electrical interconnections between European markets as a tool for collective energy security in search of self-sufficiency with its own resources. Initiatives like the plan REPowerEU They have these cross-border interconnections as one of the levers with absolute priority.
Map of transmission and storage projects. ENTSO-E
Main connections in Spain. A brief summary of the very few electrical connections of the Spanish state with other EU states:
- Existing: Spain–France (Pyrenean land interconnection), with a current capacity of approximately 3,000 MW through the Pyrenees and Spain – Portugal, through various bidirectional land high voltage lines that make up the Iberian market.
- Under construction or approved: the submarine cable of the Bay of Bizkaia between Spain and France, scheduled to enter service in 2028, will add 2,000 MW of additional capacity with France. The wire Fontefríabetween Portugal and Galicia, will provide about 1,000 MW of exchange.
- Projected (under study or preliminary phase): Apollo Link between Spain and Italy, of 2000 MW and entering service in 2032. Iberia Link between Spain and Italy of 1,200 MW. Trans-Pyrenean land connection through Navarra and Aragon, blocked by the French government.
How are they going to do it?. Technically, the project would be executed using a high-voltage direct current (HVDC) cable, the standard technology for long-distance underwater interconnections, due to its lower energy loss in transportation compared to alternating current. There are direct and operational precedents of a similar scale, such as the recent Celtic Interconnector between Ireland and France.
After signing the Memorandum of Understanding to study the viability of an underwater electricity cable that links both states, the project must be technically and economically evaluated jointly by Red Eléctrica and EirGrid, the operators of both states. They will then present it to the European authorities for possible inclusion in the list of Projects of Common Interest (PCI), which would give it access to European funding and accelerated administrative procedures. ENTSO-Ethe association of European network operators, publishes every two years the Ten-Year Network Development Planthe technical reference framework to prioritize and evaluate this type of projects.
Yes, but. The project is in its earliest phase, which means that it has everything ahead of it and a submarine cable is a major technical and economic infrastructure. A cable of more than 1,000 kilometers in length implies an estimated investment that would exceed 2,000-3,000 million euros, a construction period of several years once approved and logistical challenges in North Atlantic waters. Furthermore, the route through Asturias would require reinforcing internal transport networks to cross the Cantabrian Mountains to connect with the large solar generation centers in the interior of the peninsula.
Cover | ENTSOE
GIPHY App Key not set. Please check settings